P212I-4
快速电流 Remote Probe，带 PCT，4 通道
电流输入 Remote Probe，4 个模拟电流输入通道
20 MS/s 原始数据，16 bit，2.3 MHz (-3 dB) 带宽
*** 特性 ***
- 4 MS/s 快速实时公式数据库
- 60 V 隔离，防止接地环路
- 电流范围
* 输入范围 (6)：± 150 mA 至高达 ± 2 A
* 输入： D-Sub 9 接头
* 电压输入 ±50 mV 至 ± 20 V，用于带独立 BNC 接头的电流探头
- 电流精度为读数的 0.025%，范围的 0.01% +-200µA
- 功率精度为读数的 0.015%，范围的 0.02%
- 全带宽功率计算
（搭配电压 probe）
- 基础和高级的功率运算
（搭配电压 probe）
- 相位匹配的抗混叠保护
- 包括 2 x 6.1 GBit SFP，用于光纤连接
- 内置电源可供最多 4 个电流传感器使用
* 每个 CT 最大 1000 mA
- 机身兼容行业标准的 8 毫米槽结构型材
*** 系统要求 ***
GN800B 功率分析仪卡
Perception v8.80 及更高版本
返回至 GN800 功率分析仪卡的光纤连接电缆
Fast Current Remote Probe
The P212I-4 Current Remote Probe is the current counterpart to the voltage probe. The device provides four current inputs up to ±2 A for direct connection to current transducers (CTs) and a sample rate of up to 20 MS/s. It also offers voltage inputs for current clamps or Rogowski coils. The P212I-4 variant features also build-in power supply for CTs.
Current accuracy of 0.025% reading +0.01% range
Bandwith of 2.3 MHz (-3dB)
Single fiber connection back to GN800B power analyzer card
60 V isolation to prevent ground loops
Standard 9 pin D-Sub connector for current transducer or voltage input for current clamps with separate BNC connector
Distributable
Can be used as part of a distributed measurement system where modules are situated close to the measurement object with cable length up to 100 metres. Ideal for large scale measurements.
Minimise EMC issues
Receiver card and mainframe separate for closer positioning of card to measurement point, reducing EMC interference. Glass fibre cables enable EMC-free data transfer to mainframe, ensuring EMC immunity through fibre-optic connections.
Safe and simple cabling – less is more
Our decentralised receiver card reduces cabling needs significantly, while the use of glass fibre cables ensures rapid and EMC-free data transfer capabilities of up to 100 metres.