P101I-4
远程探头，4CH 电压
4 通道电压远程探头
通过光纤链路隔离
*** 特征 ***
- 四个模拟电压输入通道
- 隔离、平衡差分输入
- 5 MΩ 的输入阻抗（正负差分）
- 电压：
* 输入范围 (5)：±50V 至 ±2000V DC
* 1000V CAT IV、1200V DC CAT IV、1500V DC CAT III
* 输入：4 mm 完全隔离香蕉插头
- 电压精度（宽带，最坏情况）为
读数的 0.01%，量程的 0.01% ±10mV
- 功率精度，当与电流远程探头匹配时为
读数的 0.015%，量程的 0.02%
*** 要求 ***
GN800B 接收板"
Voltage Remote Probe
The P101I-4 Voltage Remote Probe revolutionises voltage measurement by minimising reflections and increasing accuracy through short
test leads. It also prevents EMC disturbances from cables and eliminates crosstalk. The optical connection ensures uncompromised user and instrument safety, even under severe overload conditions. The device features four voltage inputs up to ±2000 V and a sample rate of up to 2 MS/s.
Voltage accuracy of 0.025% reading +0.01% range
Bandwith of 2.4 MHz (-3dB)
Single fiber connection back to GN800B power analyzer card
1500V DC Cat IV rating
Distributable
Can be used as part of a distributed measurement system where modules are situated close to the measurement object with cable length up to 100 metres. Ideal for large scale measurements.
Minimise EMC issues
Receiver card and mainframe separate for closer positioning of card to measurement point, reducing EMC interference. Glass fibre cables enable EMC-free data transfer to mainframe, ensuring EMC immunity through fibre-optic connections.
Safe and simple cabling – less is more
Our decentralised receiver card reduces cabling needs significantly, while the use of glass fibre cables ensures rapid and EMC-free data transfer capabilities of up to 100 metres.